One of the most time consuming tasks with any 1997 Honda Civic EX Coupe repair, 1997 Honda Civic EX Coupe maintenance or fixing a 1997 Honda Civic EX Coupe is figuring out how to do it yourself, what tools are needed and what car parts you need for the job.
The How To Honda staff has taken all its Honda Civic EX Coupe repair articles, Honda Civic EX Coupe DIY articles, Honda Civic EX Coupe DIY info, Honda Civic EX Coupe how-to articles, Honda Civic EX Coupe maintenance articles, Honda Civic EX Coupe repair information, Honda Civic EX Coupe how-to information, Honda Civic EX Coupe maintenance info and cataloged them online for use by our visitors for free.
Our comprehensive how-to articles allow you perform your own car repair, do your own car maintenance and fix your own 1997 Honda Civic EX Coupe with all the info you need rather than spend countless hours trying to figure out how to do it yourself.
Feel free to use any DIY information that is listed on How To Honda but keep in mind that all information here is provided “as is” without any warranty of any kind and most of the how-to articles listed on our website are submitted by the How To Honda community. Use of any 1997 Honda Civic EX Coupe information is at your own risk. Always verify all how-to instructions before applying any information found here to your 1997 Honda Civic EX Coupe.
How-To Questions
If you have any questions pertaining to this 1997 Honda Civic EX Coupe DIY article, please feel free to post it at the bottom of this page and either we’ll do our best to find you the 1997 Honda Civic EX Coupe info you need or hopefully someone in the How To Honda community will have the 1997 Honda Civic EX Coupe info you’re looking for.
Adding More How-To Information
If you would like to help the How To Honda community by adding any missing information or adding any helpful tips to our resource, please feel free to post it at the bottom of this how-to article.
Required Automotive Tools:
(1) 1/4″ Drive Ratchet
(1) 1/4″ Drive 6-Point 5 mm Deep Socket
Rubber Gloves
Required Car Parts:
1997 Honda Civic Coupe Tail Lights
1997 Honda Civic EX Coupe Replace Outer Tail Light Guide:
Step 1: Put on a pair of rubber gloves and open your 1997 Honda Civic EX Coupe trunk lid.
Step 2: Locate the wire connector on the back side of your driver side tail light. Disconnect the wire connector from your driver side outer tail light.
Step 3: Locate the four mounting nuts holding the taillight to your 1997 Honda Civic EX Coupe. Using your 1/4″ drive ratchet and 5 mm socket, remove the four nuts.
Step 4: Pull your outer tail light out from the outside.
Step 5: Install your new 1997 Honda Civic EX Coupe outer tail light.
Step 6: Repeat steps 1 to 4 for the passenger side outer tail light.